- Balanced and very high impedance
(10
meg) inputs for
versatility
- Straight forward controls for quick and easy setup.
- All vacuum tube signal path for low noise, warmth,
clarity and tonal transparency. No chips used.
- High quality components: Polypropylene capacitors,
flameproof metal film resistors, gold plated connectors
ect., were chosen for the best tone and longest life.
- Tone controls are passive for an intuitive, familiar feel,
and a minimum fussing.
- Peak lamps that come on before clipping, letting you
know in advance before the signal degrades.
- Hand soldered Point-to-Point wiring, using glass
epoxy tag board for high quality and durable build
construction. Great for rugged road use.
- Rear mounted, recessed tubes for cooling and easy
access without removing unit from your rack. Only
ceramic tube sockets are used.
|
- Balanced 600 ohm output using broadcast quality
output transformer, capable of + 20 output level.
Separate line-out master control.
- Hi level unbalanced output with separate master
volume control.
- Continuous buffered tuner output.
- Hi-z input has a very high 10 meg input impedance.
This is attained by using a very special bootstrapped
follower circuit that produces little loading on pickups
such as piezo transducers, giving full range response
and eliminating the need for for additional pre-amp
box usually needed with piezo pickups.
- Buffered signal level effects loop for your favorite
pedals and processors.
- Unit does not invert the phase of signal, preserving
signal punch.
- High voltage design with audiophile concepts.
- Engineered for headroom and high fidelity
performance, Class "A" circuitry
|